5 Steps to Repacking Your Trailer Bearings

It’s really important to repack your trailer bearings on a regular basis. Why is it important? I’m so glad you asked.

The wheel bearings need to stay well lubricated to work properly while bearing the weight of your trailer. Unfortunately, over time the grease breaks down, especially if water works its way inside the bearings. Hence the importance of repacking the bearings with grease on a regular basis. It is recommended to do so every year or 10,000 miles. We are more than happy to do this for you at our shop; we take pride in providing some of the best trailer service in Grand Rapids. However I’d like to tell you DIYers  how you can do this yourself at home.

Before you begin, you will want to have all your Materials out and ready to go. Here is a complete list of everything you might want to use.

Materials Neededwheel-bearings
-Hammer
-Needle-nose pliers
-2 Jack stands
-Large flat head screwdriver
-Large adjustable wrench
-Wrench for lug nuts
-Solvent
-New cotter pin
-Bearing grease
-Gloves, clean rags and small pan

Some of these things can be substituted with a different tool, however having all these things on hand will help you do get the job done in a quick and somewhat* clean manor. Once you have these things it’s time to get in and get your hands dirty!12StepsBearing

5 Steps to Repacking your Trailer Bearings

Step 1: Removal
With the axle raised on a jack, remove the wheel and then the dustcap. The flat head screwdriver will work to take off the dustcap. Next, remove the cotter pin by unbending it and pulling it our with your needle nose pliers.  And finally remove the rear bearing.

Step 2: Cleaning 
Now it is time to take the seal out of the bearing. There are several ways to do this but we recommend simply prying it out with your flat head screw driver. Once that is out, you can remove the inner bearing as well. Use solvent to clean all the old grease off of the bearings, races, seal and hub surfaces. It’s important that you clean all parts thoroughly!

Step 3: Repacking
Once everything is out and clean, you can do the actual repacking. Do this by putting a glob of fresh grease on your palm and begin working it into the bearing. Make sure that it is fully packed and no gaps remain. It’s also ideal to add another layer of grease around the rollers, on the bearing race surfaces on the hub and the bearing’s faces. Basically, anywhere you can put new grease; do it. Grease= good.

Step 4: Replacing
Once you’re done playing in the grease, tap in a new seal, ensuring that is is even and snug.

Step 5: Assembly
Really, the only thing left is to just put it all back together. Place the drum back on the axle (maybe add yet another glob of grease to it’s face). After the careful placement of the thrust washer and spindle nut, the drum should easily spin on the axle. Insert the new cotter pin and cover with the dustcap. After putting the wheel back in place, you’re done! Well… with that one wheel, anyways.

016 (1)Here is an additional list of tips to help you get the job done perfectly.
-If your trailer has been in storage for some time, it still needs this service done. Grease will break down on a parked trailer, too.
-Don’t torque the spindle nut when you are re-assembling. It will crush the bearings. Just make sure it is snug.
-Always replace the cotter pin.
-And just in case you happen to be “that guy” stranded on the highway, we think it’s a good idea to carry an extra set of seals and bearings, all which you can find in our store.


 

Trailer Service in Grand Rapids- Grandville Trailer is Here to Help

This simple task should take you about an hour to complete and is something that most people can do on their own at home. However if you are looking for this trailer service in Grand Rapids, head on over to Grandville Trailer, where we do it often. If you just can’t find the time or space to do it yourself, or if you need to bring your trailer in for another reason anyways, we are more than happy to do this for you!

Do you have an extra set of seals and bearings stored in your truck or trailer? If you don’t, you might consider swinging by and grabbing some. If you want to tackle this project at home, we are more than happy to answer any questions you have while you are here!

At Grandville Trailer, we’re pullin’ for ya! unnamed

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>